|
5 |
In case of one surface
being more porous than the other, apply adhesive on
the higher porous surface, later. |
|
6 |
Both surfaces should be
brought together in proper alignment with each other
and pressed firmly to ensure uniform contact & even
spreading of the adhesive. |
|
7. |
The application process
should not ideally be over 15 minutes |
|
8. |
The bonded area should
be kept under pressure. Pressure can be removed
after 6-8 hrs. before usage of the bonded items.
Complete curing is achieved in 24hrs. |
| 9 |
Application can be done
by roller/brush/spatula/evenly notched applicator. |
| |
|
| |
|
| |
|
